Upstream Proxy Configuration

To configure the servers to work with the proxy, follow these steps:

sudo wget https://raw.githubusercontent.com/EricomSoftwareLtd/Shield/master/Utils/proxy.py
sudo chmod +x proxy.py
sudo ./proxy.py

Note

if wget is not available, make sure to copy the proxy.py in a different manner - download from another server, using a USB key etc.

../../../_images/proxypy3.png

Next, select the Set Proxy option (#1) and enter the following proxy details (when prompted): IP address, port, username & password (if defined, else - skip)

Once the upstream proxy is defined, commence with the installation.